-40%
Corosex/Flomag Media - 0.5 cu ft
$ 54.04
- Description
- Size Guide
Description
1/2 cubic foot of corosex for aggressive acid neutralizationProduct Features
0.5 cubic foot Corosex-Flomag
Aggressively neutralizes acid, correcting pH as low as 4.5. Labeled as Corosex or Flomag
Neutralizes pH 4.5-6
Corrects pH problems as low 4.5. Typically used in conjuction with the lower costing Calcite media for more cost effective treatment
Can Raise pH over 7.0
In lower flow applications, Corosex alone can provide alkaline (high pH), which some claim provides health benifits
High Activity
Quick reaction rate allows for higher treatment flow rates
6 GPM/ft² Service Flow
Corosex is rated for 6 GPM service flow per square foot of tank area
Min. 10 GPM/ft² Backwash Flow
Corosex requires 10 GPM per foot² of tank area for backwashing
Product Description
Highly reactive manesium oxide corrects low pH and allows for more aggresive treatment than standard Calcite media. Frequently used in conjuction with Calcite to provide cost effective treatment of lower pH water supplies.
8"x44" Tank - 0.5 cubic foot
9"x48" Tank - 1 cubic foot
10"x54" Tank - 1.5 cubic feet
12"x48" Tank - 2 cubic feet
13"x54" Tank - 3 cubic feet
More Info
Operation Conditions
Physical Properties
pH Range
4.5-6.0
Color
brownish white
Service Flow
6 GPM/ft²
Physical Form
Granular
Freeboard
50%(min)
Mesh Size
6 x 16
Backwash Rate
10-12 GPM/ft²
Bulk Density
75 lb/cubic feet
Bed Depth
24"-30"
Specific Gravity
3.6
Composition
Standard Package
1/2 cubic feet bags (42.5 lb)
MgO
97% min
Replenish Rate
Typical Results
Yearly, depending on pH levels, volume of water used, and water chemistry
Service Flows
Service flow rate is the rate (in gallons per minute) at which the media can effectively treat your water. The listed number is the manufacturers recommend rate for maximum neutralization. Higher flow rates MAY be possible in situations where slightly acidic water is desired/acceptable or where incoming water is not very acidic to begin with.
Backwash Flow Rates
The backwash flow rate is the minimum rate that MUST be available to ensure proper backwashing and peak system performance. The number shown is the manufacturers recommend rate. Please note that lower backwash rates MAY be used, but system performance my be reduced.
Free shipping only for orders shipped within the contiguous USA. Outside provinces, HI, and AK are all additional and an additional invoice will be sent for balance due on shipping. International orders will ship by Ebay global shipping program unless prior arrangements are made.